基本情報
定格出力 | >1000MAH |
基準電圧 | >12V |
使用法 | フォークリフト |
証明書 | CE Un38.3 IEC62133 RoHS MSDS |
輸送パッケージ | 木製ケース |
仕様 | カスタマイズされたデザインが利用可能 |
商標 | エネルギー交換 |
起源 | 中国 |
HSコード | 8507600090 |
生産能力 | 1000個/日 |
製品説明
現在、エレクトロモビリティへの変化の兆しは自動車の世界だけではありません。 マテリアルハンドリング機器業界は、長い間この分野の先駆者でした。 しばらく前から、IC エンジン搭載トラックの代わりに電動フォークリフトの需要が高まっています。 課題は、内燃エンジンを搭載したトラックと同様の高い車両可用性を確保することです。 ここでLi-IONテクノロジーが活躍します。 スマートフォンなどの日常使用でその価値が証明されており、フォークリフトの鉛蓄電池に比べて一連の利点を提供します。
1.短くて素早いリロード
短い休憩中でもバッテリーを充電できるため、費用と時間のかかるバッテリー交換はもう必要ありません。
2.より高いエネルギー効率
より高いエネルギー密度と高い全体的なシステム効率により、エネルギーが最大 30% 増加します。
3.強力なシステム
バッテリー残量が減少してもパフォーマンスが低下することはありません。
4.ユーザーフレンドリーなソリューション
有害なバッテリーガスや酸の漏れがありません。 メンテナンスフリーでお手入れも簡単です。
LiFePO4 バッテリー 48V 300ah リチウムイオンバッテリー E-パレットトラックバッテリー/フォークリフトバッテリー/Bt/Lpe200 バッテリー用
モデル | ENBY-48V-300Ah |
容量(0.2C5A) | 300Ah |
公称電圧 | 48V |
最大。 充電電圧 | 58.4V |
放電終止電圧 | 40V(推奨) |
充電電圧 | 58.4V±0.03V |
連続放電電流 | 300A |
ピーク放電電流 | 5秒以内に900A |
重量(約) | 180kg |
バッテリーの寸法 |
| |
| 3000 Times/td> |
| |
|
| |
|
|
500 times deep cycle 80% capacity left,4 times of lead acid battery4. No memory effect,highly efficient charge anytime, no reduction of capacity5. Good performance at high temperature and high temperature resistance6. Low self-discharge rate: < 3% monthlybr>
* Do not use other types of chargers to charge the lithium battery, you need to use a special charger for lithium batteries.* The output voltage and current of the lithium battery charger must meet the charging voltage and current specified in the "Lithium Battery Pack Parameters".* Do not store the battery in a humid, high temperature place;* Do not put the battery in the fire to avoid explosion;* Do not short-circuit the battery terminals or reverse charge the battery;* Do not disassemble the battery shell;* Do not touch the battery with wet hands;* Do not squeeze or hit the battery;* Prohibit overcharging, overdischarging, short circuit of positive and negative poles* Avoid charging in direct sunlight;* Do not soak in water, and the wading depth shall not be higher than 1/3 of the cabinet;* Do not disassemble or modify the battery at will;* When the battery is not in use, it should be fully charged and stored in a dry and cool place, well insulated to prevent heavy pressure and child contact, and fully charged every 3 months* If damage is found after unpacking, please contact the distributor or manufacturer in time after finding out.